Loading...
Biomes 4567 HQ
- Key Stage 4
- Year 10
- Geography
Let's look at the map again to see how we can investigate the spatial distribution of global biomes. The web map contain several GIS layers, which act a little bit like sheets of tracing paper on top of each other, and we can use them to look at the spatial distribution a bit more clearly. One way we can do this is to switch or toggle layers or even parts of the layers, as we'll see, by switching them on and off using filters and things called transparency sliders. Good question there from Sophia, how do we use filters? Let's see. First we go to the content toolbar and open the Layers panel. And check we've got the correct layer on. We can toggle that on and off by clicking the Visibility eye. And just the right of the Visibility eye are three dots and they give us a whole load of other options. So if I click those and then click Show Properties, I reveal from the toolbar on the other side, it's called the settings toolbar. A whole load of other things to do, you can see lots of icons down here. Now, once I've clicked that, those three dots to show the properties bar, I can then select something to do with that layer and I'm going to select Filter. So if I select Filter, you'll notice that that panel changes and it says it wants me to add something new. So let's do that and add something new. The official name of the layer is Elem_Biome, and it's saying to me, what part of it do you want to show? So I'm saying the bit I want to show is desert. And if I click that, you can see that that's all that appears, and I can click the popups. And when I click the popups, the rest of the desert is highlighted and I can hide the Layers panel because that's getting in the way a little bit. So I can see more of the map if I just move that to one side. So what we've done is taken the other biomes out of view, we can only see the desert biome. And that's quite useful if we're trying to really concentrate on studying the spatial distribution of just one biome because we've removed the others from our view by selecting just part of the layer, the part that shows the deserts. And we could do the same with one of the other biome such as temperate forests. And we can move the map around by sliding this 'cause this is a web map. And indeed, by doing that, we can then see that temperate rainforests extend throughout a Australasia, that is through Australia and New Zealand. Let's look at another layer. We go back to the selection panel and we'll look this time at tropical forests or tropical rainforests. We put that layer on, filter all out and we can see the distribution of rainforest around the world. And if we change the base map, that might help us with our distribution descriptions because we can then see which precise countries rainforests run through because we can see the boundaries there and the names of forests. So we're not just saying rainforests are in Central Africa, we can say precisely which countries that they're mainly found in. Now, apart from filtering, there's one other thing we can do, which is use the transparency slider. So demonstrate this, I'm gonna put a layer on, which is a little bit easy to see, which is deserts. And then we head over to the settings toolbar. And this time, we're gonna close the filter by clicking that cross and we're gonna find the transparency slider. And we just basically scroll down until we can see the word transparency and then we can make the layer more or less transparent. Naught percent means that it's not transparent. So if we increase the transparency, we can eventually reach a hundred percent where the layer disappears altogether. Transparency could be useful if we want to explore perhaps the physical or human geography underneath the layer. If we go, for example, to the deserts in Southwest USA and Northwest Mexico, at the moment, we could just see a load of orange, which is slightly obscuring what's underneath. So if we just zoom down on that and then use the transparency slider, we get a better idea of what the landscape is like underneath. And we can see that there are actually some quite big settlements there, like Tucson. So that's a useful way to use that. If I put the layer back and we go to another part of the world, perhaps we go to somewhere in the Sahara. So if we go to this area of the Sahara here, what we can then see if we just, we can see that the desert actually does reach right down to the coastline. A lot of people think deserts are only in land, but they're not, they reach right down to the sea. And this is very important because winds that blow off the Sahara blow vast amounts of dust into the atmosphere, which eventually falls out over the sea providing nutrients for the ocean, but also for the land around the Caribbean where it fertilises the soils. It's quiet an important source of nutrients.
Biomes 4567 HQ
- Key Stage 4
- Year 10
- Geography
Let's look at the map again to see how we can investigate the spatial distribution of global biomes. The web map contain several GIS layers, which act a little bit like sheets of tracing paper on top of each other, and we can use them to look at the spatial distribution a bit more clearly. One way we can do this is to switch or toggle layers or even parts of the layers, as we'll see, by switching them on and off using filters and things called transparency sliders. Good question there from Sophia, how do we use filters? Let's see. First we go to the content toolbar and open the Layers panel. And check we've got the correct layer on. We can toggle that on and off by clicking the Visibility eye. And just the right of the Visibility eye are three dots and they give us a whole load of other options. So if I click those and then click Show Properties, I reveal from the toolbar on the other side, it's called the settings toolbar. A whole load of other things to do, you can see lots of icons down here. Now, once I've clicked that, those three dots to show the properties bar, I can then select something to do with that layer and I'm going to select Filter. So if I select Filter, you'll notice that that panel changes and it says it wants me to add something new. So let's do that and add something new. The official name of the layer is Elem_Biome, and it's saying to me, what part of it do you want to show? So I'm saying the bit I want to show is desert. And if I click that, you can see that that's all that appears, and I can click the popups. And when I click the popups, the rest of the desert is highlighted and I can hide the Layers panel because that's getting in the way a little bit. So I can see more of the map if I just move that to one side. So what we've done is taken the other biomes out of view, we can only see the desert biome. And that's quite useful if we're trying to really concentrate on studying the spatial distribution of just one biome because we've removed the others from our view by selecting just part of the layer, the part that shows the deserts. And we could do the same with one of the other biome such as temperate forests. And we can move the map around by sliding this 'cause this is a web map. And indeed, by doing that, we can then see that temperate rainforests extend throughout a Australasia, that is through Australia and New Zealand. Let's look at another layer. We go back to the selection panel and we'll look this time at tropical forests or tropical rainforests. We put that layer on, filter all out and we can see the distribution of rainforest around the world. And if we change the base map, that might help us with our distribution descriptions because we can then see which precise countries rainforests run through because we can see the boundaries there and the names of forests. So we're not just saying rainforests are in Central Africa, we can say precisely which countries that they're mainly found in. Now, apart from filtering, there's one other thing we can do, which is use the transparency slider. So demonstrate this, I'm gonna put a layer on, which is a little bit easy to see, which is deserts. And then we head over to the settings toolbar. And this time, we're gonna close the filter by clicking that cross and we're gonna find the transparency slider. And we just basically scroll down until we can see the word transparency and then we can make the layer more or less transparent. Naught percent means that it's not transparent. So if we increase the transparency, we can eventually reach a hundred percent where the layer disappears altogether. Transparency could be useful if we want to explore perhaps the physical or human geography underneath the layer. If we go, for example, to the deserts in Southwest USA and Northwest Mexico, at the moment, we could just see a load of orange, which is slightly obscuring what's underneath. So if we just zoom down on that and then use the transparency slider, we get a better idea of what the landscape is like underneath. And we can see that there are actually some quite big settlements there, like Tucson. So that's a useful way to use that. If I put the layer back and we go to another part of the world, perhaps we go to somewhere in the Sahara. So if we go to this area of the Sahara here, what we can then see if we just, we can see that the desert actually does reach right down to the coastline. A lot of people think deserts are only in land, but they're not, they reach right down to the sea. And this is very important because winds that blow off the Sahara blow vast amounts of dust into the atmosphere, which eventually falls out over the sea providing nutrients for the ocean, but also for the land around the Caribbean where it fertilises the soils. It's quiet an important source of nutrients.
Biomes 123 (cursor visible) HQ © Esri, USGS : Esri, TomTom, FAO, NOAA, USGS. Biomes 4567 HQ © Esri, USGS : Esri, TomTom, FAO, NOAA, USGS. Biome expl 12345 © Esri, USGS : Esri, TomTom, FAO, NOAA, USGS.