Short circuits and earth wires
I can explain how electric circuits are wired in a home, with circuit breakers, fuses and earth wires for safety.
Short circuits and earth wires
I can explain how electric circuits are wired in a home, with circuit breakers, fuses and earth wires for safety.
These resources will be removed by end of Summer Term 2025.
Lesson details
Key learning points
- A short circuit happens when a wire becomes loose and touches the wrong part of a circuit, or makes a new circuit.
- If a live wire touches the inside of a metal case, the metal case may become live.
- If there is too much current in an appliance, a fuse on the live wire in its plug melts and turns it off.
- From a live metal case, current flows along an earth and live wire, melts a fuse and turns the electricity off.
- Domestic circuits with excessive current are turned off by circuit breakers in a consumer box to prevent fire.
Keywords
Short circuit - a complete circuit with a very small resistance, often caused by a loose wire
Double insulation - two layers of electrical insulation, including the outer casing of an appliance
Fuse - a thin wire that melts when a dangerously large current flows through it
Earth wire - a wire connected between a metal casing and the ground (0 V)
Circuit breaker - a switch that is turned off by an electromagnet when a dangerously large current flows through it
Common misconception
A short circuit is a circuit that doesn’t work.
Demonstrate several short circuits and provide opportunity for pupils to describe what they are in their own words.
Equipment
power pack, heat resistant mat, leads and crocodile clips, thin resistance wire, lamp, and tin can
Licence
This content is © Oak National Academy Limited (2024), licensed on Open Government Licence version 3.0 except where otherwise stated. See Oak's terms & conditions (Collection 2).
Lesson video
Loading...
Starter quiz
6 Questions
Exit quiz
6 Questions
